How to protect your laptop battery well?

How to protect your laptop battery well?

We don't really like to care for the laptop battery.Only when the laptop battery breaks down,so that we find we must to do some to change this.but, how to protect the laptop battery well? here some good ways for you.

Procedure:

First,after we bought the battery, and charge it fully, then we don't conside it anymore.Isn't it good for the laptop battery? The answer is wrong. Actually we must full charge for it at least three times

If you want your laptop batter with a long life .When you buy it you should make it in a good beginning.The new battery has 3% power left gennerally and we should wear out it and don't use the external power.And then we charge it and repeat this thress times to active the battery.

Second , don't charge the laptop battery so frequently.If you charge the laptop battery frequently ,with the charge times growing,your battery will go nearly to retire.Avoid leaving your battery for a long time and you have better use up your laptop battery's power before charge it second time.Don't leave it in a hot or wet place, this is a common sense we should know.

Third,the correction can improve the battery capacity? - error
correction called, is when the battery's actual capacity and the control circuit when the record is not the same capacity,the battery charge and discharge a depth of operation ,the control ciruit to record , so close to the battery the actual situation, this is a real capacity of the operating performance of the battery rather than enhance the capacity factor here is the actual battery capacity ,if the actual battery capacity than the capacity of the control circuit to a record high, corretion you can make the battery appear to increase capacity, and if the actual battery capacity than the capacity of the control circuit to a record low ,the corretion will reduce the capacity of the battery looks, which is why many people are debating the reasons for correction effect,remember that the ture correction is to make the battery capacity shown by the control circuit between the battery and eliminate the bias, as demonstrated by the capacity will increase or decrease,this is the state of the battery itself,and not deteminded by your correction .Corretion is likely because the battery discharge when the depth of damage, but greatly reduced capacity.

Fourth, you don't need to consider that with full charged laptop battery ,it will explode.The chance is so low .Many times the explosion is cased by the high temperature that case the fire.But it's too low to see the condition .Generally it comes out with the iphone or other thing.

Toshiba PA3478U-1BRS battery

Notice:

It's better for you to put off the laptop battery when you don't use it .

If you find the laptop is in high tempeture , you must suspend and have a bre

Was this helpful? 0 0 Comments

You're reading How to protect your laptop battery well?.