MSI GT663R GT680DX GT680R Battery Newest Using Tips

Q: individual users can not disassemble MSI notebook LCD?
A: You can not. Even if the LCD off after a very long time, its internal components of the CFL backlight inverter is still possible with the high pressure of about 1000V, this pressure can lead to serious personal injury. MSI GT663R Battery , So do not disassemble the LCD, so as not to experience high pressure. And without the dealer permission to disassemble the power LCD will lose the warranty.
Q: I heard that LCD on the air humidity is very demanding, with this time thing?
A: It is not accurate, the general humidity of 30% to 80%, LCD can work, but once the indoor humidity above 80%, the monitor will produce condensation inside. Its internal power supply transformers and other coils when wet prone to leakage, there may even cause the connection to short circuit. Therefore, LCD must pay attention to moisture, long time do not display, you can work regularly power for some time, so that the heat generated when the monitor will work inside the moisture driven out.
Assigned by the high-energy MSI GT680DX Battery (lithium-ion laptop batteries) for the battery before first use activated Dianchi method is as follows: first use of lithium-ion battery, the battery may be only a few remnants of power, need to give the battery discharge and then recharge . In the off state of charge.
Battery is fully charged, you can use. To use the first three all used up battery power and then recharge. Moreover, the charging time can not be lower than the first charge time. To ensure maximum battery is activated to ensure the effective use of battery time.
The process is known to activate MSI GT680R Battery . After three complete charge and discharge, the battery can normally use.

Was this helpful? 0 0 Comments

You're reading MSI GT663R GT680DX GT680R Battery Newest Using Tips.