The difference between solid wood flooring and engineered wood flooring

On first inspection there isn’t any great aesthetic difference between solid wood and
engineered wood flooring. However before you rush out and opt for the cheapest wood floor there are a few pros and cons to weigh up for both engineered and solid wood floors.

Construction

Solid wood flooring is milled from the tree to give a solid wood plank which has an uninterrupted wood grain and is solely constructed of one solid section of wood. They are mostly constructed with a tongue and groove format.

Engineered wood floors consist of a top layer of natural hardwood which is stuck to a cross layered section of natural soft or hard wood known as ply wood. The cross layering of the ply enables the plank to be more stable due to the glue used so that when the wood expands width ways the different angles reduce the amount of expansion.

Durability

Solid wood flooring is more durable than engineered as it gains its strength from being one solid piece of wood and can be re-sanded and refinished with different waxes, stains or oils more times then engineered. Though the life of any floor does depend on how well it is looked after with recommended care products.

Engineered wood flooring is still very durable and can only be re-sanded five times as the top hardwood layer cannot withstand more.
Really good maintenance is key to durability as when the right cleaning products are used a wood floor can last a very long time.

Stability

Solid wood floor isn’t considered as stable as engineered due to its seasonal movements, meaning that they are susceptible to expansion and contraction with humidity changes in the home. A small perimeter gap accommodates this movement. Solid wood floor is not generally recommended if underfloor heating is already installed as the heat can cup and warp the boards. It is also not advisable to lay solid wood flooring on concrete, unless a full moisture test has been carried out and it is sealed, as the levels of moisture can also affect the boards.

Engineered wood flooring is more stable and more multi functional then solid wood as it is suitable for laying on underfloor heating, concrete and is compatible with most types of underlay making it a good option for those living in second floor and basement flats.

Installation

Solid wood floor can be stuck down or secret nailed and it is not recommended that they are floated over underlay as the joints are glued down and wouldn’t allow the boards to move with seasonal humidity and moisture.

Engineered wood flooring can be stuck down, nailed and floated. It is versatile but does still require a perimeter gap just to be on the safe side with slight board movements.

Was this helpful? 0 0 Comments

You're reading The difference between solid wood flooring and engineered wood flooring.